New listing

The OBC Marina berth can also be purchased as a package deal with the boat or separately after the boat has been sold.

Introducing Colombina to the market for the first time!

Designed by Frank Pelin and launched in 2007 Colombina was built by Father and Son. Constructed of Heart Kahikatea frames and stringers, BS1088 Red Maranti Plywood double diagonal and fibre glassed with epoxy. The frames and stringers were built by Pelham boats and the cabin structure was built by a Shipwright and overseen by John Norris. A professional cabinet maker was used for the interior.

Colombina presents in good condition for its age and is a large volume vessel for its size. There is ample storage throughout the cockpit and interior with almost every cavity used. There is also a lot of space on the cabin top for storing paddle boards etc.

In the Interior there are 2 cabins. One double and a 4 berth bunk cabin (vee berth converts to double also) along with 2 extra berths in the saloon she comfortably sleeps 8.

The galley is well equipped with a 4 burner stove and oven, 130L Fridge and a 110L freezer. The hot water is instantly supplied via a LPG califont.

The saloon is very spacious with a large folding saloon table. The carpet was replaced in 2025 and the leather upholstery is in good condition.

Powered by twin Iveco 330hp engines (with the coolers being replaced in 2024) on shafts with Morse controls that have been maintained annually with records available for a serious buyer.

The transom is set up with Weaver tender davits to store the 3.1m Maxxon rib that is powered by a 3.3hp Mercury outboard engine. There is also 2 live bait tanks on the duck board along with a removable bait board and ample fishing rod holders.

This is a well-built 14m sedan that is ready to go to its next owner for its next chapter of its life! The berth at the OBC marina is also available for purchase as a package deal with the boat or separately after the boat has sold.

For more information or to arrange a viewing please contact one of the team today!

Pelin Columbia 14m

Been kept in excellent condition and maintained annually!
Been kept in excellent condition and maintained annually!
$250,000 NZD

Boat Details
Boat Type Launch
Build Pelin
Model Columbia 14m
Year 2007
Location Auckland
Hull Type Planing
Hull Material Wood
Fuel Type Diesel
Specifications
LOA 14M
Beam 4.01M
Draft 1.06M
Fuel 800L
Water 600L
Mechanical
Engine Type Twin Inboard
Engine Brand Iveco
Drive Type Shaft Drive
No. of engines 2
Horsepower 330 HP
Hours 900 Hrs
Cruising speed 14-16 Knots
Max. speed 23 Knots
Accommodation
Cabins 2
Berths 8
Heads 1
Showers 1 + Cockpit shower
On Deck
Tender Maxxon 3.1m Rib
Outboard 3.3hp Mercury
Anchor 45LB Manson Plow
Chain / Warp Chain + Warp
Features
  • Weaver Davits for Tender on the Transom
  • 4x Large Solar Panels on Cabin Top
  • NEW Aft Canopy in 2026
  • Anchor Wash System
Contacts
Scott Oldfield 021 799794
Drew Blair 021 2887555
Jason Snashall 021 929592
Downloads

Introducing Colombina to the market for the first time!

Designed by Frank Pelin and launched in 2007 Colombina was built by Father and Son. Constructed of Heart Kahikatea frames and stringers, BS1088 Red Maranti Plywood double diagonal and fibre glassed with epoxy. The frames and stringers were built by Pelham boats and the cabin structure was built by a Shipwright and overseen by John Norris. A professional cabinet maker was used for the interior.

Colombina presents in good condition for its age and is a large volume vessel for its size. There is ample storage throughout the cockpit and interior with almost every cavity used. There is also a lot of space on the cabin top for storing paddle boards etc.

In the Interior there are 2 cabins. One double and a 4 berth bunk cabin (vee berth converts to double also) along with 2 extra berths in the saloon she comfortably sleeps 8.

The galley is well equipped with a 4 burner stove and oven, 130L Fridge and a 110L freezer. The hot water is instantly supplied via a LPG califont.

The saloon is very spacious with a large folding saloon table. The carpet was replaced in 2025 and the leather upholstery is in good condition.

Powered by twin Iveco 330hp engines (with the coolers being replaced in 2024) on shafts with Morse controls that have been maintained annually with records available for a serious buyer.

The transom is set up with Weaver tender davits to store the 3.1m Maxxon rib that is powered by a 3.3hp Mercury outboard engine. There is also 2 live bait tanks on the duck board along with a removable bait board and ample fishing rod holders.

This is a well-built 14m sedan that is ready to go to its next owner for its next chapter of its life! The berth at the OBC marina is also available for purchase as a package deal with the boat or separately after the boat has sold.

For more information or to arrange a viewing please contact one of the team today!

Pelin Columbia 14m
$250,000 NZD

Enquire about this vessel

If you have any questions about this vessel or would like to arrange a viewing, please complete this form or call us on 09 524 8444.

"*" indicates required fields

Name*
Email opt in

More boats for sale

I was delighted by Orakei Marine's pleasant and efficient sales and aftersales service. The sales team are very knowledgeable about the Merry Fisher range and great to deal with. A big thanks to Scott Oldfield for his professional manner and attention to detail, resulting in a great experience.
John Berry Jeanneau Merry Fisher 895
Book a service

Service Contact Details

021 220 9333 service@orakeimarine.co.nz
Enquire now
0
Your Cart
Your cart is currently empty.
Your cart is empty

Explore the range of products available from Orakei Marine

Added to cart